[computer-tech-support: 7863] Re: motherboard replacement

If you were able to break the pins, I dont think it is a good idea to
replace the motherboard yourself...because you know you may break the
new one...so I would recommend a specialist to do the job, although it
is not hard, ......
if it happens you insist to replace it yourself, try marking cables,
so you dont mis-attach anything in the wrong place....
Check to see if you can get a same or arround price for a better
motherboard, it would be better, the big issues are the CPU, RAM, and
PCI cards(HDDs, monitor, and case are compatible with almost
everything)...if all are supported and the price is almost the same,
get something better.

On Oct 28, 2:28 pm, Mohammad AbuShady <coalwat...@gmail.com> wrote:
> Well just thought i should add a small thing, you have a primary and a
> secondary IDE ports, i'm not sure if you can break a SATA port, so if you're
> just using 1 hard disk and 1 dvd for example you can switch to secondary IDE
> port without needing to buy any new motherboard.
>
>
>
> On Thu, Oct 28, 2010 at 2:24 PM, Anvesh Saxena <ranju20...@gmail.com> wrote:
> > Yes that's just enough information required for getting the motherboard and
> > everything is simple as you think -just plug and play
>
> > On Thu, Oct 28, 2010 at 6:14 AM, Elizabeth McCree <emccre...@gmail.com>wrote:
>
> >>  I have an older HP Pavilion computer where I need to replace the
> >> motherboard as some of the pins on the motherboard have broken off for
> >> connection of the hard drive to the motherboard. I when to HP website and
> >> got my specifications for the manufacturer and model number. I need to know
> >> if this is all I need to know when replacing the motherboard. Can I just
> >> match up the model number or the model name to get a replacement? Also, is
> >> it as simple as plugging everything into it as usual because that is what I
> >> think. I've never done this before, but it occurs to me that all I am going
> >> to have to do is screw in the new motherboard and attach all the fans,
> >> cables, etc. to it and then all is well.
>
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "Computer Tech Support" group.
> >> To post to this group, send email to
> >> computer-tech-support@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> computer-tech-support+unsubscribe@googlegroups.com<computer-tech-support%2B unsubscribe@googlegroups.com>
> >> .
> >> For more options, visit this group at
> >>http://groups.google.com/group/computer-tech-support?hl=en.
>
> > --
> > Anvesh Saxena
>
> >  --
> > You received this message because you are subscribed to the Google Groups
> > "Computer Tech Support" group.
> > To post to this group, send email to
> > computer-tech-support@googlegroups.com.
> > To unsubscribe from this group, send email to
> > computer-tech-support+unsubscribe@googlegroups.com<computer-tech-support%2B unsubscribe@googlegroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/computer-tech-support?hl=en.

--
You received this message because you are subscribed to the Google Groups "Computer Tech Support" group.
To post to this group, send email to computer-tech-support@googlegroups.com.
To unsubscribe from this group, send email to computer-tech-support+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en.